Easy Setup for Your Logitech 650 Remote

Logitech 650 Remote

In order for you to really be able to use Logitech 650 remote properly, it’s always a wise thing to read Logitech 650 manual first. There will be complete explanation about the remote starting from the set up to the troubleshooter. Here, you will learn some of the most important things you need to know about the manual so it should be easier for you to understand this remote and its usage.

  1. Inserting the Batteries

As you notice, Logitech 650 uses batteries as its power source. And for such purpose, based on Logitech 650 manual, you should get two AA alkaline batteries. Surely, it’s okay for you to use rechargeable batteries. As long as the size is right and the amount is also correct, it should be fine. To insert the batteries, you should remove or open battery cover first and then insert the batteries. Don’t forget to reattach the cover after inserting the batteries. Please also remember that this remote doesn’t have recharging feature which means that the batteries will not be charged even if you connect your Logitech 650 to the computer.

  1. Gathering Information of the Devices You’re Going to Control

Logitech 650 is able to control multiple devices at once. In total, there should be up to 6 devices to be controlled using this remote. Whenever you are going to control entertainment system, it’s necessary for you to know the manufacturer and also the model number of the devices. You can gather such information by taking a look at the back part of the devices. Write the information down for further setup.

  1. Accomplishing Online Setup

Yes, before, you can use the remote, Logitech 650 manual demands you to complete online setup. Online software has been included in the package and it should be a piece of cake for you to do it. Connect the remote to your computer which has been connected to the internet by using USB cable (has already been provided along with the package). Visit Logitech.com/myharmony and follow the instructions to complete the setup.

  1. Trying out the Remote

The last thing to do is to try the remote. If the previous steps have been done properly, the remote should work properly. You can try to point the remote to the device and see if it’s working as you control. In case you want to make some changes, all you need to do is to connect the remote to the computer again and modify the setup as you please.

Leave a Reply